• EA-EOC101P 1
  • EA-EOC101P 2

EA-EOC101P

加入詢問車


    • MODEL EA-EOC101P
    Extender Interface
    Connector Type 1x BNC
    Cable Type 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
    Max. Transmission Distance 600m (2000ft.) for the RG6 coaxial cable
    Ethernet Interface
    Connector Type 1x RJ-45 with LEDs on Connector
    Cable Type Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
    Rate IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
    Output Voltage IEEE 802.3af/at PSE@ RJ45 Port
    Control & Indicators
    Color LED Coaxial Data Signal Strength
    Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps)
    Red: BAD (Link speed < 20Mbps) / Off: NO LINK
    Yellow LED (On RJ45) Power On
    Green LED (On RJ45) Link/Act.
    Push Button Reset / Pairing
    Power
    Input Operating Voltage DC 56V / 0.03 - 1.6A
    Power Consumption 1.5W (w/o power forwarding)
    Mechanical & Environmental
    Operation Temperature -20°C ~ 60°C
    Humidity 20% to 85% RH. (non-condensing)
    Storage Temperature -30°C ~ 80°C (-22°F ~ 176°F)
    Dimensions (W × L × H) 38 x 120 x 33 mm
    Weight 176 g



    TECHNICAL DATA FOR GUIDANCE PURPOSES ONLY PLEASE VERIFY WITH OUR SALES OFFICE

    Transmission Distance with Power Delivered: COAXIAL Cable

    Power Delivered

    Power Source

    		 Not using
    PoE output    		 5.5W 7W 9W 12W 17W
    Maximum Coax RG6. Data Link Distance
    DC56V Power Supplied 2000m 600m 500m 400m 300m 200m

    Transmission Distance with Power Delivered: UTP Cable

    Power Delivered

    Power Source

    		 Not using
    PoE output    		 16W 18W 19.5W 20W 22W
    Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance
    DC56V Power Supplied 600m 600m 500m 400m 300m 200m

    Transmission Distance with Power Delivered: 18 AWG

    Power Delivered

    Power Source

    		 Not using
    PoE output    		 17W 18W 20W 21W 22W
    Maximum 2-Wire. Data Link Distance
    DC56V Power Supplied 600m 600m 500m 400m 300m 200m


     

    Dimension：

    CONNECTION DIAGRAM：

    • Application 1: IP Camera & NVR Typical Installation


    • Application 2: IP Camera w/ External Power Supply & NVR Installation


    • Application 3: Star Quadruple PoE IPC via Ethernet over Coax (EoC) with PoE Transmission System


    • Application 4: Daisy-chained Quadruple PoE IPC via Ethernet over Coax (EoC) with PoE Transmission System

     
    • Application 5: Single PoE IP camera via Ethernet over UTP (EoU) with PoE Transmission System 

     
    • Application 6: Single PoE IP speed dome via Ethernet over UTP (EoU) with PoE Transmission System (IP speed dome needs external adapter)

     
    • Application 7: Single PoE IPC via 18 AWG cable with PoE Transmission System

     
    • Application 8: Star Quadruple PoE IPC via Ethernet over UTP (EoU) with PoE Transmission System

     
     
     
    • Support Pairing function to remove crosstalk issue
    • No PC required, plug & play
    • Significantly reducing cable and power distribution costs
    • Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial cable
    • Inject power over an existing coaxial cable to PoE IP camera
    • Up to 600 meter transmission distance by RG6 cable
    • Pairing function for Anti-Crosstalk
    • Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
    • Multi EoC transceiver / IP cameras to one transceiver at NVR side transmission
    • Kits model: 
      EA-EOU101P: EA-EOC101P + 15-BJ101
    回上層