• Video Ground Loop Isolator 1

Video Ground Loop Isolator

15-GB01H
Add to inquiry box
Production information
COP 15-GB01H Video Ground Loop Isolator is a passive device for reducing the ground loop interference of signal transmission. It’s used when signal transmission via coaxial cable between 2 points with different ground potentials. It can be easily installed in a new or an existing system, and can effectively solve the problem of ground potential difference caused by unbalanced power line load. 


  • Fully Compatible with CVBS/AHD/CVI/TVI
  • BNC male to female, both with 10cm cable
  • Built in Video BALUN, perfect to reduce the video interference
Model 15-GB01H
Insertion Loss 0.5dB
Frequency Response 0-3dB at 10Mhz
Input / Output BNC male / BNC female
Isolation Voltage 600VDC (Min)
Insulation Resistance 100M ohm
Transient Voltage Suppressors 5 V rms
Dimension 61(W) X 31(H) X 23(D)
with 10cm x 2 cables
Weight (g) 48g
Voltage Drop According to Cable Length (CATS 24AWG)
Input Voltage DC / AC 24V
Length 50M 100M 300M 600M
Power Consumption 1PAIR 2PAIR 3PAIR 1PAIR 2PAIR 3PAIR 1PAIR 2PAIR 3PAIR 1PAIR 2PAIR 3PAIR
50mA 23.6 23.6 23.7 22.8 23.6 23.8 20.5 22 22.5 18 20.2 21.5
100mA 23.2 23.4 23.6 22 22.5 23 18 19.8 22.2 14 18.5 19.8
150 mA 22.2 22.8 23.2 21.2 22 22.7 14.5 18 20.2 X 16.1 18.9
200mA 21.8 22.4 23.2 20 21.8 22.3 13.5 17.8 20.2 X 13.2 17
250mA 21.5 22.2 22.9 19.1 21.1 21.5 10.8 16.8 19 X 11 14.6
300mA 21.1 21.5 21.8 18.5 20.5 21 X 15.7 18.1 X X 13.2
350mA 20.7 21.3 21.6 17.5 20.5 21.4 X 15 17.5 X X 11.8
400mA 20 20.3 21 16.5 18 21 X 13.5 17.1 X X 10.8
450mA 19.5 20 20.8 15.6 17.8 20.2 X 12.1 16 X X X
500mA 19.1 21 21.8 14.6 17.7 20 X 11.4 15.2 X X X
Back to the top