Ethernet Power Over Coaxial Master/Slave Transceiver (500Mbps)
Ethernet Power Over Coaxial Master/Slave Transceiver (500Mbps)
EA-EOC101PH
Add to inquiry box
Production information
Ethernet Power Over Coaxial Master/Slave Transceiver (500Mbps)
EA-EOC101PH is designed to extend IP Ethernet transmission and forward the power over coaxial cable to PoE IP camera. EA-EOC101PH transmission distance is up to 600m (2000 ft). These transceivers are extremely simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
EA-EOC101PH is designed to extend IP Ethernet transmission and forward the power over coaxial cable to PoE IP camera. EA-EOC101PH transmission distance is up to 600m (2000 ft). These transceivers are extremely simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
Download file
- No PC required, plug & play and reducing the cables and power distribution cost
- Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial cable
- Inject power over an existing coaxial cable to PoE IP camera.
- Up to 600 meter transmission distance by RG6 cable
- Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
- Multi EoC transceiver/IP cameras to one transceiver at NVR side transmission
| MODEL | EA-EOC101PH | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Extender Interface | |||||||||||||
| Connector Type | 1x BNC | ||||||||||||
| Cable Type | 75-ohm RG59, RG6, or RG11 video-grade coaxial cable | ||||||||||||
| Max. Transmission Distance | 600m (2000ft.) for the RG6 coaxial cable | ||||||||||||
| Ethernet Interface | |||||||||||||
| Connector Type | 1x RJ-45 with LEDs on Connector | ||||||||||||
| Cable Type | Straight through or cross-over Cat5 Cable, Auto MDI/MDIX | ||||||||||||
| Rate | IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half duplex | ||||||||||||
| Output Voltage | IEEE 802.3af/at/bt PSE@ RJ45 Port | ||||||||||||
| Control & Indicators | |||||||||||||
| Color LED | Coaxial Data Signal Strength Green: GOOD (Link speed > 70 Mbps) Amber: MEDIUM (Link speed 25~70Mbps) Red: BAD (Link speed < 25Mbps) OFF: NO LINK |
||||||||||||
| Yellow LED (On RJ45) | Power On | ||||||||||||
| Green LED (On RJ45) | Link/Act. | ||||||||||||
| Push Button | Reset / Pairing(1) (Join or Leave Network Group(2))
|
||||||||||||
| Power | |||||||||||||
| Input Operating Voltage | DC 56V / 0.03 - 1.8A | ||||||||||||
| Power Consumption | 2.0W (w/o power forwarding) | ||||||||||||
| Mechanical & Environmental | |||||||||||||
| Weight | 100g (3.2 oz) | ||||||||||||
| Dimensions (W × L × H) | 42 x 109 x 27mm (1.65”x4.29”x1.06”) | ||||||||||||
| Operation Temperature | -20°C ~ +70°C (-4°F ~ 158°F) | ||||||||||||
| Storage Temperature | -40°C ~ 85°C (-40°F ~ 185°F) | ||||||||||||
| Humidity | 10% to 85% RH. (non-condensing) | ||||||||||||
- All EA-EOC101 factory default is paired to same network group, it can be installed directly, no need to pair again.
- The transmission system consists of one EA-EOC101 transceiver at NVR side and up to four EA-EOC101 transceivers that connect to IP cameras or other IP device.
- Use two or more transmission systems at NVR side, and there are crosstalk problems on cables that between different transmissions systems, otherwise no need to do pairing process.
- To join another network group, must leave current group first, then do the group join.


◆Application Diagram 2: Single Camera w/ External Power Supply EoC Transmission

◆Application Diagram 3: Star Two Cameras EoC with PoE Transmission System

◆Application Diagram 4: Star Quadruple Cameras EoC with PoE Transmission System

◆Application Diagram 5: Daisy-chained Quadruple Cameras EoC with PoE Transmission System

FEATURE
- No PC required, plug & play and reducing the cables and power distribution cost
- Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial cable
- Inject power over an existing coaxial cable to PoE IP camera.
- Up to 600 meter transmission distance by RG6 cable
- Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
- Multi EoC transceiver/IP cameras to one transceiver at NVR side transmission
SPECIFICATION
| MODEL | EA-EOC101PH | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Extender Interface | |||||||||||||
| Connector Type | 1x BNC | ||||||||||||
| Cable Type | 75-ohm RG59, RG6, or RG11 video-grade coaxial cable | ||||||||||||
| Max. Transmission Distance | 600m (2000ft.) for the RG6 coaxial cable | ||||||||||||
| Ethernet Interface | |||||||||||||
| Connector Type | 1x RJ-45 with LEDs on Connector | ||||||||||||
| Cable Type | Straight through or cross-over Cat5 Cable, Auto MDI/MDIX | ||||||||||||
| Rate | IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half duplex | ||||||||||||
| Output Voltage | IEEE 802.3af/at/bt PSE@ RJ45 Port | ||||||||||||
| Control & Indicators | |||||||||||||
| Color LED | Coaxial Data Signal Strength Green: GOOD (Link speed > 70 Mbps) Amber: MEDIUM (Link speed 25~70Mbps) Red: BAD (Link speed < 25Mbps) OFF: NO LINK |
||||||||||||
| Yellow LED (On RJ45) | Power On | ||||||||||||
| Green LED (On RJ45) | Link/Act. | ||||||||||||
| Push Button | Reset / Pairing(1) (Join or Leave Network Group(2))
|
||||||||||||
| Power | |||||||||||||
| Input Operating Voltage | DC 56V / 0.03 - 1.8A | ||||||||||||
| Power Consumption | 2.0W (w/o power forwarding) | ||||||||||||
| Mechanical & Environmental | |||||||||||||
| Weight | 100g (3.2 oz) | ||||||||||||
| Dimensions (W × L × H) | 42 x 109 x 27mm (1.65”x4.29”x1.06”) | ||||||||||||
| Operation Temperature | -20°C ~ +70°C (-4°F ~ 158°F) | ||||||||||||
| Storage Temperature | -40°C ~ 85°C (-40°F ~ 185°F) | ||||||||||||
| Humidity | 10% to 85% RH. (non-condensing) | ||||||||||||
- All EA-EOC101 factory default is paired to same network group, it can be installed directly, no need to pair again.
- The transmission system consists of one EA-EOC101 transceiver at NVR side and up to four EA-EOC101 transceivers that connect to IP cameras or other IP device.
- Use two or more transmission systems at NVR side, and there are crosstalk problems on cables that between different transmissions systems, otherwise no need to do pairing process.
- To join another network group, must leave current group first, then do the group join.
DIMENSION
DIAGRAM
◆Application Diagram 1: Single Camera EoC with PoE Transmission System
◆Application Diagram 2: Single Camera w/ External Power Supply EoC Transmission
◆Application Diagram 3: Star Two Cameras EoC with PoE Transmission System

◆Application Diagram 4: Star Quadruple Cameras EoC with PoE Transmission System
◆Application Diagram 5: Daisy-chained Quadruple Cameras EoC with PoE Transmission System

◆Application Diagram 2: Single Camera w/ External Power Supply EoC Transmission

◆Application Diagram 3: Star Two Cameras EoC with PoE Transmission System

◆Application Diagram 4: Star Quadruple Cameras EoC with PoE Transmission System

◆Application Diagram 5: Daisy-chained Quadruple Cameras EoC with PoE Transmission System













