24-Ports GE PoE/ 4 10G SFP Uplink L3 Managed PoE Switch
24-Ports GE PoE/ 4 10G SFP Uplink L3 Managed PoE Switch
LW-62804AGM3
Add to inquiry box
Production information
24-Ports GE PoE/ 4 10G SFP Uplink L3 Managed PoE Switch
- 24x10/100/1000Base-T POE ports + 4x1/10G uplink SFP + ports + 1 console
- L3+ features provide better manageability, security, QoS, and performance
- SFP support 100Base-FX, 1000Base-X
- Support dynamic or static binding by users’ definition, such as IP, MAC, VLAN, PORT, etc.
- Support STP (802.1D) and RSTP(802.1w) and MSTP(802.1s)
- Support 32K MAC self-learning and self-updating
- Jumbo frames support up to 9.6K bytes
- Support 32M byte buffer memory
- Back-bound Bandwidth 598Gbps
- Dimension: 440x290x44.5mm (LxWxH)
- Power supply: Built-in Power AC 100~240V (total power: 400W)
| Model No. | LW-62804AGM3 |
| Interface | 24 x 10/100/1000Base-T PoE ports (Data/Power) 4 x 1/10G uplink SFP+ fiber slot ports (Data) 1 x Console RS232 port (115200, N, 8, 1) |
| Managed Type | L3 |
| PoE Port | Port 1-24 can support IEEE 802.3af/at PoE standard |
| Network Protocol | IEEE802.3 10BASE-T; IEEE802.3i 10Base-T IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X IEEE802.3ae 10GBase-SR/LR IEEE802.3x |
| PoE Standard | IEEE802.3af/at international standard |
| Ethernet Port Feature | Port 1-24 can support 10/100/1000BaseT(X) auto detect, full/half duplex MDI/MDI-X adaptive |
| Fiber Port Feature | 10G SFP fiber interface (Fiber module is not included) |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 598Gbps (non-blocking) |
| Forwarding Rate@64byte | 107.14Mpps |
| MAC | 32K |
| Buffer Memory | 32M |
| Twisted Pair Transmission | 10BASE-T:Cat3,4,5 UTP(≤100 meter) ; 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter) |
| Optical Fiber Cable | Multi-mode: 850nm 0~300M(10G) Single-mode: 1310nm 0~40KM,1550nm 0~120KM |
| Power Supply | Default: 1/2(+),3/6(-) |
| Max/Average Power Per Port | 30W/15.4W |
| Total PWR / Input Voltage | 400W (AC100-240V) |
| Power Consumption | Standby<25W; Full Load<400W |
| Power Supply | Built-in power supply, AC 100~240V 50-60Hz 5A |
| LED Indicator | Power indicator: PWR(yellow); system indicator: SYS(yellow); Network indicator; Link(yellow); PoE indicator: PoE (green); Fiber port indicator L/A(green) |
| Operation TEMP/Humidity | -20~+55°C; 5%~90% RH Non condensing |
| Storage TEMP /Humidity | -40~+80°C; 5%~95% RH Non condensing |
| Dimension (LxWxH) | 440 x 290 x 44.5mm |
| Weight | 4.4kg |
| L3 Managed Features | |
| Interface |
|
| PoE Management |
|
| L3 Function |
|
| VLAN |
|
| Port Aggregation |
|
| Spanning Tree |
|
| Industrial Ring Network Protocol |
|
| Multicast |
|
| Image |
|
| QoS |
|
| ACL |
|
| Safety Characteristics |
|
| DHCP |
|
| Management and Maintenance |
|
| System Requirements |
|

FEATURE
- 24x10/100/1000Base-T POE ports + 4x1/10G uplink SFP + ports + 1 console
- L3+ features provide better manageability, security, QoS, and performance
- SFP support 100Base-FX, 1000Base-X
- Support dynamic or static binding by users’ definition, such as IP, MAC, VLAN, PORT, etc.
- Support STP (802.1D) and RSTP(802.1w) and MSTP(802.1s)
- Support 32K MAC self-learning and self-updating
- Jumbo frames support up to 9.6K bytes
- Support 32M byte buffer memory
- Back-bound Bandwidth 598Gbps
- Dimension: 440x290x44.5mm (LxWxH)
- Power supply: Built-in Power AC 100~240V (total power: 400W)
SPECIFICATION
| Model No. | LW-62804AGM3 |
| Interface | 24 x 10/100/1000Base-T PoE ports (Data/Power) 4 x 1/10G uplink SFP+ fiber slot ports (Data) 1 x Console RS232 port (115200, N, 8, 1) |
| Managed Type | L3 |
| PoE Port | Port 1-24 can support IEEE 802.3af/at PoE standard |
| Network Protocol | IEEE802.3 10BASE-T; IEEE802.3i 10Base-T IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X IEEE802.3ae 10GBase-SR/LR IEEE802.3x |
| PoE Standard | IEEE802.3af/at international standard |
| Ethernet Port Feature | Port 1-24 can support 10/100/1000BaseT(X) auto detect, full/half duplex MDI/MDI-X adaptive |
| Fiber Port Feature | 10G SFP fiber interface (Fiber module is not included) |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 598Gbps (non-blocking) |
| Forwarding Rate@64byte | 107.14Mpps |
| MAC | 32K |
| Buffer Memory | 32M |
| Twisted Pair Transmission | 10BASE-T:Cat3,4,5 UTP(≤100 meter) ; 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter) |
| Optical Fiber Cable | Multi-mode: 850nm 0~300M(10G) Single-mode: 1310nm 0~40KM,1550nm 0~120KM |
| Power Supply | Default: 1/2(+),3/6(-) |
| Max/Average Power Per Port | 30W/15.4W |
| Total PWR / Input Voltage | 400W (AC100-240V) |
| Power Consumption | Standby<25W; Full Load<400W |
| Power Supply | Built-in power supply, AC 100~240V 50-60Hz 5A |
| LED Indicator | Power indicator: PWR(yellow); system indicator: SYS(yellow); Network indicator; Link(yellow); PoE indicator: PoE (green); Fiber port indicator L/A(green) |
| Operation TEMP/Humidity | -20~+55°C; 5%~90% RH Non condensing |
| Storage TEMP /Humidity | -40~+80°C; 5%~95% RH Non condensing |
| Dimension (LxWxH) | 440 x 290 x 44.5mm |
| Weight | 4.4kg |
| L3 Managed Features | |
| Interface |
|
| PoE Management |
|
| L3 Function |
|
| VLAN |
|
| Port Aggregation |
|
| Spanning Tree |
|
| Industrial Ring Network Protocol |
|
| Multicast |
|
| Image |
|
| QoS |
|
| ACL |
|
| Safety Characteristics |
|
| DHCP |
|
| Management and Maintenance |
|
| System Requirements |
|
DIMENSION









