• 220VAC Power Surge Protector 4P, 40kA 1
  • 220VAC Power Surge Protector 4P, 40kA 2
  • 220VAC Power Surge Protector 4P, 40kA 3
  • 220VAC Power Surge Protector 4P, 40kA 4

220VAC Power Surge Protector 4P, 40kA

15-SP07M-4P
Add to inquiry box
    • Production information
    220VAC Power Surge Protector 4P, 40kA

    This product is IEC/ EN 61643-11 and CNS 14676-4 / CNS 14676-5 certified
       


    • High energy surge protection
    • Built-in flash interrupter device
    • Remote alarm interface
    • Pluggable replacement module
    • Failure detection indicator
    • Maximum discharge current of single module is 20-40KA (8/20 us)
    • Standard modular installation
    • Reaction rate: 10⁻⁹ Sec
    • IEC/ EN 61643-11 certified
    Model No. 15-SP07M-4P
    SPD port 1 port
    SPD category Combination type
    Test category Class II test
    Un 220VAC 50~60Hz
    Uc 280VAC 50~60Hz
    In(8/20μs) 20kA
    Imax(8/20μs) 40kA
    Up(8/20μs) 1.2kV
    Fuse or circuit breaker/backup protector 25A/ 60kA
    tA ≤25ns
    Size 72 x 90 x 69mm
    Failure indication Green : Normal
    Red : Invalid
    Section area of wires 6~25mm²
    Installation method 35mm standard rail (EN50022/ DIN46277-3)
    Installation method -40°C~85°C
    Sheathing material Plastic, accord with UL94 V-0
    Remote alarm NO/NC contact terminal (Optional)
    Remote signal interface connection capability The maximum 1.5mm² single stand/cord
     
    Product Certifications & Standards

    15-SP07M Series Certified to CNS Standards and Compliant with International Standards

    CNS 14676-4 CNS 14676-5 ANSI / IEEE C62.41 IEC / EN 61643-11

    Certification & Compliance Statement

    COP Security System Corp. has completed the applicable certification procedures for the 15-SP07M Series in accordance with CNS 14676-4 and CNS 14676-5. The series also complies with the relevant requirements of ANSI / IEEE C62.41 and IEC / EN 61643-11.

    Certifications & Applicable Standards

    The 15-SP07M Series has obtained the following CNS certifications and complies with the international standards listed below:

    CNS Certifications

    CNS 14676-4
    CNS 14676-5

    International Standards Compliance

    ANSI / IEEE C62.41
    IEC / EN 61643-11

    Applicable Models

    The certification and compliance information on this page applies to the following models in the 15-SP07M Series:

    15-SP07M-1 15-SP07M-2PE 15-SP07M-3P 15-SP07M-3PL 15-SP07M-4P 15-SP07M-DC10 15-SP07M-DC15
     
    Certification & Test Documents

    CNS Certification & International Standards Test Documentation

     

    15-SP07M Series international standards test and compliance document View Full-Size Document

     

    15-SP07M Series certification document View Full-Size Document

     

    i The information provided on this page is intended to present product certification and standards compliance information. For official certification standards, test conditions, applicable models, and scope of validity, please refer to the relevant certification documents and official test reports.
    Back to the top