Ethernet Over Coaxial Master/Slave Transceiver (500Mbps)
Ethernet Over Coaxial Master/Slave Transceiver (500Mbps)
EA-EOC101H
Add to inquiry box
Production information
Ethernet Over Coaxial Master/Slave Transceiver (500Mbps)
EA-EOC101H is designed to extend IP Ethernet transmission and use coaxial cable to IP camera. EA-EOC101H transmission distance up to 2500m (8200ft), these transceivers are extremely simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
Download file
No PC required, plug & play and reducing the cables cost
Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial cable
Up to 2500 meter transmission distance by RG6 cable
Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
Multi EoC transceiver/IP cameras to one transceiver at NVR side transmission
75-ohm RG59, RG6, or RG11 video-grade coaxial cable
Max. Transmission Distance
2500m (8200ft.) for the RG6 coaxial cable
Ethernet Interface
Connector Type
1x RJ-45 with LEDs on Connector
Cable Type
Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
Rate
IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half duplex
Control & Indicators
Color LED
Coaxial Data Signal Strength Green:GOOD (Link speed > 70 Mbps) Amber:MEDIUM (Link speed 25~70Mbps) Red:BAD (Link speed < 25Mbps) OFF:NO LINK
Yellow LED (On RJ45)
Power On
Green LED (On RJ45)
Link/Act.
Push Button
Reset / Pairing(1) (Join or Leave Network Group(2))
Push Duration
LED Status
Description
1 – 3 sec
Red Blink
Join/Host Network Group(3)
5 – 8 sec
Amber Blink Once -> OFF
Leave Network Group(4)
12 - 15 sec
OFF -> Amber Blink Once
Reset to Default Network Group
Power
Input Operating Voltage
DC 12V / 1.0A
Power Consumption
2W
Mechanical & Environmental
Weight
100g (3.2 oz)
Dimensions (W × L × H)
42 x109 x 27mm (1.65”x4.29”x1.06”)
Operation Temperature
-20°C ~ +70°C (-4°F ~ 158°F)
Storage Temperature
-40°C ~ 85°C (-40°F ~ 185°F)
Humidity
10% to 85% RH. (non-condensing)
1. All EA-EOC101 factory default is paired to same network group, it can be installed directly, no need to pair again.
2. The transmission system consists of one EA-EOC101 transceiver at NVR side and up to four EA-EOC101 transceivers connecting to IP cameras or other IP devices.
3. Use two or more transmission systems at NVR side, and unless there are crosstalk problems from cables between different transmissions systems, there is no need to do pairing process.
4. To join another network group, must leave current group first, and then do the group join.
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
◆Application Diagram 1: Networking EoC Transmission System
◆Application Diagram 2: Single Camera EoC Transmission System
◆Application Diagram 3: Star Two Cameras EoC Transmission System
◆Application Diagram 4: Star Quadruple Cameras EoC Transmission System
◆Application Diagram 5: Daisy-Chained Quadruple Cameras EoC Transmission System
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
FEATURE
No PC required, plug & play and reducing the cables cost
Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial cable
Up to 2500 meter transmission distance by RG6 cable
Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
Multi EoC transceiver/IP cameras to one transceiver at NVR side transmission
75-ohm RG59, RG6, or RG11 video-grade coaxial cable
Max. Transmission Distance
2500m (8200ft.) for the RG6 coaxial cable
Ethernet Interface
Connector Type
1x RJ-45 with LEDs on Connector
Cable Type
Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
Rate
IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half duplex
Control & Indicators
Color LED
Coaxial Data Signal Strength Green:GOOD (Link speed > 70 Mbps) Amber:MEDIUM (Link speed 25~70Mbps) Red:BAD (Link speed < 25Mbps) OFF:NO LINK
Yellow LED (On RJ45)
Power On
Green LED (On RJ45)
Link/Act.
Push Button
Reset / Pairing(1) (Join or Leave Network Group(2))
Push Duration
LED Status
Description
1 – 3 sec
Red Blink
Join/Host Network Group(3)
5 – 8 sec
Amber Blink Once -> OFF
Leave Network Group(4)
12 - 15 sec
OFF -> Amber Blink Once
Reset to Default Network Group
Power
Input Operating Voltage
DC 12V / 1.0A
Power Consumption
2W
Mechanical & Environmental
Weight
100g (3.2 oz)
Dimensions (W × L × H)
42 x109 x 27mm (1.65”x4.29”x1.06”)
Operation Temperature
-20°C ~ +70°C (-4°F ~ 158°F)
Storage Temperature
-40°C ~ 85°C (-40°F ~ 185°F)
Humidity
10% to 85% RH. (non-condensing)
1. All EA-EOC101 factory default is paired to same network group, it can be installed directly, no need to pair again.
2. The transmission system consists of one EA-EOC101 transceiver at NVR side and up to four EA-EOC101 transceivers connecting to IP cameras or other IP devices.
3. Use two or more transmission systems at NVR side, and unless there are crosstalk problems from cables between different transmissions systems, there is no need to do pairing process.
4. To join another network group, must leave current group first, and then do the group join.
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
DIMENSION
OPTIONAL ACCESSORIES
15-TV119 - BNC Male to 2 BNC Female
15-BJ101 - BNC to RJ45 Adapter
15-BT104 - BNC to 2-Wire Adaptor
15-BC104 - BNC 1 to 4 Cable
DIAGRAM
◆Application Diagram 1: Networking EoC Transmission System
◆Application Diagram 2: Single Camera EoC Transmission System
◆Application Diagram 3: Star Two Cameras EoC Transmission System
◆Application Diagram 4: Star Quadruple Cameras EoC Transmission System
◆Application Diagram 5: Daisy-Chained Quadruple Cameras EoC Transmission System