Ethernet Power Over Coaxial Master Transceiver (500Mbps) by bt PoE Switch
EA-EOC101PB
Add to inquiry box
Production information
Ethernet Power Over Coaxial Master Transceiver (500Mbps) by bt PoE Switch
EA-EOC101PB are designed to extend IP Ethernet transmission and forward the power over coaxial or UTP cable with PoE output to IP camera. EA-EOC101PB transmission distance up to 600M (2000ft) depended on supplied power, these transmitters are extremely simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
EA-EOC101PB are designed to extend IP Ethernet transmission and forward the power over coaxial or UTP cable with PoE output to IP camera. EA-EOC101PB transmission distance up to 600M (2000ft) depended on supplied power, these transmitters are extremely simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
Download file
FEATURE
- No PC required, plug & play and reducing the cables and power distribution cost
- Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial or UTP cable
- PoE powered or Inject DC56V power over an existing coaxial or UTP cable to PoE IP camera.
- Up to 600 meter over RG-6 transmission distance
- Built-in 6KV surge protection
SPECIFICATION
| MODEL | EA-EOC101PB | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Extender Interface | |||||||||||||
| Connector Type | 1x BNC | ||||||||||||
| Cable Type | 75-ohm RG59, RG6 cable | ||||||||||||
| Max. Transmission Distance | 600m (2000ft.) RG6 DC56V Powered 550m (1800ft.) RG6 PoE++ Powered 400m (1300ft.) RG6 PoE+ Powered |
||||||||||||
| Ethernet Interface | |||||||||||||
| Connector Type | 1x RJ-45 with LEDs on Connector | ||||||||||||
| Cable Type | Straight through or cross-over Cat5 Cable, Auto MDI/MDIX | ||||||||||||
| Rate | IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half duplex | ||||||||||||
| Input Voltage | IEEE 802.3at/bt PD@ RJ45 Port | ||||||||||||
| Power | |||||||||||||
| Input Operating Voltage | DC 56V / 0.03 – 1.8A @DC JACK IEEE 802.3at (PoE+) DC54V / 0.60A MAX. IEEE 802.3bt (PoE++) DC54V / 1.20A MAX. |
||||||||||||
| Power Consumption | 2.0W (w/o power forwarding) |
||||||||||||
| Control & Indicators | |||||||||||||
| Color LED | Coaxial Data Signal Strength Green: GOOD (Link speed > 70 Mbps) Amber: MEDIUM (Link speed 25~70Mbps) Red: BAD (Link speed < 25Mbps) OFF: NO LINK |
||||||||||||
| Yellow LED (On RJ45) | Power On | ||||||||||||
| Green LED (On RJ45) | Link/Act. | ||||||||||||
| Push Button | Reset / Pairing(1) (Join or Leave Network Group(2))
|
||||||||||||
| Mechanical & Environmental | |||||||||||||
| Weight | 100g (3.2 oz) | ||||||||||||
| Dimensions (W × L × H) | 42 x109 x 27mm (1.65”x4.29”x1.06”) | ||||||||||||
| Operation Temperature | -20°C ~ +70°C (-4°F ~ 158°F) | ||||||||||||
| Storage Temperature | -40°C ~ 85°C (-40°F ~ 185°F) | ||||||||||||
| Humidity | 10% to 85% RH. (non-condensing) | ||||||||||||
- All EA-EOC101 factory default is paired to same network group, it can be installed directly, no need pairing again.
- The transmission system consists of one EA-EOC101x transceiver at NVR side and up to four EA-EOC101 transceivers that connect to IP cameras or other IP device.
- Use two or more transmission systems at NVR side, and there are crosstalk problems on cables that between different transmissions systems, otherwise no need to do pairing process.
- To join another network group, must leave current group first, then do the group join.
DIMENSION
DIAGRAM
◆Application Diagram 1: Single Camera EoC with PoE Transmission System (PoE+ Power Supplied)
◆Application Diagram 2: Single Camera EoC with PoE Transmission System (External DC56V Power Supplied)
◆Application Diagram 3: Star Quadruple Cameras EoC with PoE Transmission System (External 60W~90W PoE Switch Power Supplied)
◆Application Diagram 4: Star Quadruple Cameras EoC with PoE Transmission System (External 60W~90W PoE Switch Power Supplied)
◆Application Diagram 2: Single Camera EoC with PoE Transmission System (External DC56V Power Supplied)
◆Application Diagram 3: Star Quadruple Cameras EoC with PoE Transmission System (External 60W~90W PoE Switch Power Supplied)
◆Application Diagram 4: Star Quadruple Cameras EoC with PoE Transmission System (External 60W~90W PoE Switch Power Supplied)
