• Ethernet Power Over Coaxial Master/Slave Transceiver (500Mbps) 1

Ethernet Power Over Coaxial Master/Slave Transceiver (500Mbps)

EA-EOC101PH
Add to inquiry box
Production information
Ethernet Power Over Coaxial Master/Slave Transceiver (500Mbps)

EA-EOC101PH is designed to extend IP Ethernet transmission and forward the power over coaxial cable to PoE IP camera. EA-EOC101PH transmission distance is up to 600m (2000 ft). These transceivers are extremely simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
Download file


  • No PC required, plug & play and reducing the cables and power distribution cost
  • Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial cable
  • Inject power over an existing coaxial cable to PoE IP camera.
  • Up to 600 meter transmission distance by RG6 cable
  • Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
  • Multi EoC transceiver/IP cameras to one transceiver at NVR side transmission



OPTIONAL ACCESSORIES

15-TV119 - BNC Male to 2 BNC Female

15-BJ101 - BNC to RJ45 Adapter

15-BT104 - BNC to 2-Wire Adaptor

  

15-BC104 - BNC 1 to 4 Cable

MODEL EA-EOC101PH
Extender Interface
Connector Type 1x BNC
Cable Type 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
Max. Transmission Distance 600m (2000ft.) for the RG6 coaxial cable
Ethernet Interface
Connector Type 1x RJ-45 with LEDs on Connector
 
Cable Type		  
Straight through or cross-over Cat5 Cable,
 AutoMDI/MDIX
 
 
Rate		  
IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half duplex
Output Voltage IEEE 802.3af/at/bt PSE@ RJ45 Port
Control & Indicators
 
 
 
 
Color LED		  
Coaxial Data Signal Strength Green：GOOD (Link speed > 70 Mbps) Amber：MEDIUM (Link speed 25~70Mbps) Red：BAD (Link speed < 25Mbps) OFF：NO LINK
Yellow LED (On RJ45) Power On
Green LED (On RJ45) Link/Act.
 
 
 
 
 
 
  
Push Button		  
Reset / Pairing(1) (Join or Leave Network Group(2))
Push
Duration		 LED
Status		 Description
1 – 3 sec Red Blink Join/Host Network
Group(3)
5 – 8 sec Amber Blink
Once -> OFF		 Leave Network Group(4)
12 - 15 sec OFF -> Amber
Blink Once		 Reset to Default Network
Group
Power
Input Operating Voltage DC 56V / 0.03 - 1.8A
Power Consumption 2.0W (w/o power forwarding)
Mechanical & Environmental
Weight 100g (3.2 oz)
Dimensions (W × L × H) 42 x109 x 27mm (1.65”x4.29”x1.06”)
Operation Temperature -20°C ~ +70°C (-4°F ~ 158°F)
Storage Temperature -40°C ~ 85°C (-40°F ~ 185°F)
Humidity 10% to 85% RH. (non-condensing)

1. All EA-EOC101 factory default is paired to same network group, it can be installed directly, no need to pair again.
2. The transmission system consists of one EA-EOC101 transceiver at NVR side and up to four EA-EOC101 transceivers that connect to IP cameras or other IP device.
3. Use two or more transmission systems at NVR side, and there are crosstalk problems on cables that between different transmissions systems, otherwise no need to do pairing process.
4. To join another network group, must leave current group first, then do the group join.


OPTIONAL ACCESSORIES

15-TV119 - BNC Male to 2 BNC Female

15-BJ101 - BNC to RJ45 Adapter

15-BT104 - BNC to 2-Wire Adaptor

  

15-BC104 - BNC 1 to 4 Cable




OPTIONAL ACCESSORIES

15-TV119 - BNC Male to 2 BNC Female

15-BJ101 - BNC to RJ45 Adapter

15-BT104 - BNC to 2-Wire Adaptor

  

15-BC104 - BNC 1 to 4 Cable

◆Application Diagram 1: Single Camera EoC with PoE Transmission System


◆Application Diagram 2: Single Camera w/ External Power Supply EoC Transmission



◆Application Diagram 3: Star Two Cameras EoC with PoE Transmission System
 



◆Application Diagram 4: Star Quadruple Cameras EoC with PoE Transmission System


◆Application Diagram 5: Daisy-chained Quadruple Cameras EoC with PoE Transmission System
 
 



OPTIONAL ACCESSORIES

15-TV119 - BNC Male to 2 BNC Female

15-BJ101 - BNC to RJ45 Adapter

15-BT104 - BNC to 2-Wire Adaptor

  

15-BC104 - BNC 1 to 4 Cable

Back to the top