• AC220V Power Surge Protector, 40kA 1
  • AC220V Power Surge Protector, 40kA 2
  • AC220V Power Surge Protector, 40kA 3
  • AC220V Power Surge Protector, 40kA 4

AC220V Power Surge Protector, 40kA

15-SP07M-3PL
Add to inquiry box
    • Production information
    AC220V Power Surge Protector, 40kA

    This product is IEC/ EN 61643-11 and CNS 14676-4 / CNS 14676-5 certified
       


    • High-Performance Surge Protection
    • Built-In Instantaneous Overcurrent Disconnection Device
    • NO/NC Dry Contact Alarm Output (Optional)
    • Plug-In Replaceable Modules
    • Failure Status Indicator
    • Maximum Discharge Current per Module: 20–40 kA (8/20 μs)
    • Standard Modular Installation
    • Response Time: Nanosecond Level (10⁻⁹ sec.)
    • Complies with IEC/EN 61643-11 and ANSI/IEEE C62.41 Requirements
    • CNS14676-4 and CNS14676-5 certified
    Model 15-SP07M-3PL
    Product Overview
    Product Name AC220V Power Surge Protective Device, 40kA Rating, 3-Phase 3-Wire
    Product Description Designed for AC220V three-phase, three-wire power systems, providing protection against lightning strikes, power surges, and transient overvoltage.
    Complies with IEC / EN 61643-11 and ANSI / IEEE C62.41 certification requirements.
    Product Features High-performance surge protection
    Built-in transient overcurrent disconnection device
    NO / NC dry contact alarm terminal, optional
    Pluggable replaceable module
    Failure detection indicator
    Maximum discharge current per module: 20–40kA, 8/20µs
    Standard modular installation
    Response speed: 10⁻⁹ second level
    Complies with IEC / EN 61643-11 and ANSI / IEEE C62.41 certification requirements
    Lightning Protection Specifications
    SPD Port One port
    SPD Type Combination type
    Test Class Class II test
    Power System 3 Ø 3W (three-phase, three-wire)
    Rated Voltage 220VAC, 50–60Hz
    Maximum Continuous Operating Voltage 275VAC, 50–60Hz
    Nominal Discharge Current 20kA
    Maximum Discharge Current 40kA
    Protection Level 1.2kV
    Response Time ≤25ns
    Installation and Wiring
    Circuit Breaker 32A
    Installation Wire Cross-Section 3.5–22mm²
    Installation Method 35mm standard DIN rail, EN50022 / DIN46277-3
    Alarm Contact Normally open / normally closed contact terminal, optional
    Alarm Contact Wiring Maximum 1.5mm² solid wire / flexible wire
    Status Indication and Structure
    Indicator Green: Normal
    Red: Failure
    Dimensions 54 × 90 × 66 mm
    Operating Temperature -40°C ~ 85°C
    Housing Material Plastic, compliant with UL94 V-0
     
    Product Certifications & Standards

    15-SP07M Series Certified to CNS Standards and Compliant with International Standards

    CNS 14676-4 CNS 14676-5 ANSI / IEEE C62.41 IEC / EN 61643-11

    Certification & Compliance Statement

    COP Security System Corp. has completed the applicable certification procedures for the 15-SP07M Series in accordance with CNS 14676-4 and CNS 14676-5. The series also complies with the relevant requirements of ANSI / IEEE C62.41 and IEC / EN 61643-11.

    Certifications & Applicable Standards

    The 15-SP07M Series has obtained the following CNS certifications and complies with the international standards listed below:

    CNS Certifications

    CNS 14676-4
    CNS 14676-5

    International Standards Compliance

    ANSI / IEEE C62.41
    IEC / EN 61643-11

    Applicable Models

    The certification and compliance information on this page applies to the following models in the 15-SP07M Series:

    15-SP07M-1 15-SP07M-2PE 15-SP07M-3P 15-SP07M-3PL 15-SP07M-4P 15-SP07M-DC10 15-SP07M-DC15
     
    Certification & Test Documents

    CNS Certification & International Standards Test Documentation

     

    15-SP07M Series international standards test and compliance document View Full-Size Document

     

    15-SP07M Series certification document View Full-Size Document

     

    i The information provided on this page is intended to present product certification and standards compliance information. For official certification standards, test conditions, applicable models, and scope of validity, please refer to the relevant certification documents and official test reports.
    Back